Call us: +1 305 7266 026
Ice makers are a convenient addition to your kitchen, providing a steady supply of ice cubes without the need to refill trays manually. Like any other appliance, your ice makers require proper maintenance and cleaning to keep them functioning efficiently. If you neglect to clean your Frigidaire ice maker EFIC235, it can lead to decreased performance and even bacterial growth, affecting the quality of the ice cubes it produces. In this article below, we will provide you with a step-by-step guide on…
How to Clean Frigidaire ice maker EFIC235?

Step 1: Turn Off and Unplug the Ice Maker
Before beginning any cleaning procedure, turn off and unplugged your ice maker from the power source. This will prevent any accidental injuries and damage to the appliance during the cleaning process.
Step 2: Remove Ice Bin and Clean
Remove the ice bin from the ice maker and discard any remaining ice cubes. Wash the ice bin with warm water and mild soap, rinse thoroughly, and allow it to dry completely before placing it back in the ice maker.
Step 3: Remove the Ice Maker’s Components
Remove the ice maker’s components, including the ice tray, water reservoir, and ice scoop. Wash these components with warm water, you can use any multi-purpose cleaner. Then pour water thoroughly, and air dry them completely.
Step 4: Clean the Interior of the Ice Maker
Using a soft cloth, clean the interior of the ice maker. Especially, pay close attention to the areas where the components were removed. Be sure to remove any debris, dirt, or stain that may have accumulated inside.
Step 5: Clean the Water Reservoir
To clean the water reservoir, fill it with a mixture of one part white vinegar and three parts water. Allow the mixture to sit in the reservoir for 10-15 minutes, then drain the solution and rinse the reservoir thoroughly with clean water.
Step 6: Clean the Ice Maker’s Exterior
Take a soft cloth or sponge. Clean the exterior of your ice maker with a cleaning solution like mild soap or any other suitable cleaner. Remove any stains, fingerprints, or spills that may have occurred during use. Don’t use abrasive cleaners or pads, these can scratch the surface of your ice maker.
Step 7: Reassemble the Ice Maker
Once you have cleaned all the components and dried completely, reassemble the ice maker. Ensure all parts are properly aligned and securely in place.
Step 8: Plug in and Turn On the Ice Maker
After reassembling the ice maker, plug it back into the power source and turn it on. Then run it for a few minutes to ensure it functions properly.
Besides, you can watch this video for more…
FAQs
Do ice makers need to be cleaned?
Yes, ice makers need to be cleaned regularly to ensure they function properly and produce clean, safe ice for consumption. Over time, minerals, bacteria, and other impurities can build up in the ice maker and its components, leading to unpleasant tastes and odors in the ice. Additionally, a dirty ice maker can harbor harmful bacteria that can cause illness if consumed. You can easily clean and make your ice maker fresh with our cleaning steps that are already mentioned above.
How often should an ice machine be deep cleaned?
Ice machines should be deep cleaned at least once every six months to maintain their performance and ensure that the ice they produce is safe for consumption. However, the frequency of deep cleaning may vary depending on the usage and environment of the ice machine. For example, if the ice machine is located in a humid or dusty environment, it may require more frequent cleaning.
Does vinegar dissolve ice?
Yes, vinegar can dissolve ice to some extent, but it is not a reliable or efficient method of removing ice. Vinegar contains acetic acid, which can lower the freezing point of water and melt ice. The concentration of acetic acid in vinegar is usually not high enough to quickly and effectively dissolve ice.
Can a dirty filter affect your ice maker?
Yes, a dirty filter can affect the performance of your ice maker. The filter in your ice maker is designed to remove impurities such as minerals, sediment, and bacteria from the water that you used to make ice. If the filter becomes clogged or dirty, it can impede the flow of water into the ice maker, reducing the amount and quality of ice produced.
A dirty filter can also lead to unpleasant tastes and odors on the ice. As water passes through a clogged filter, it may not be effectively purified, allowing impurities to remain in the water and transfer into the ice. This can result in ice that tastes or smells bad, making it less appealing to consume.
Regularly replacing or cleaning the filter in your ice maker is important to ensure that it functions properly and produces clean, safe ice.
Can a dirty ice maker make you sick?
Yes, a dirty ice maker can potentially make you sick. Over time, bacteria, mold, and other impurities can build up in an ice maker, contaminating the ice it produces. Consuming contaminated ice can lead to illnesses such as stomach infections, diarrhea, and vomiting.
Can bacteria survive in ice cubes?
Yes, bacteria can survive in ice cubes. Ice cubes are not sterile substances, and they can harbor bacteria that are present in the water used to make the ice. The freezing process does not necessarily kill all types of bacteria, and some bacteria can even continue to grow and multiply in the ice if the conditions are right.
If you don’t maintain and clean your ice maker properly, bacteria can accumulate and grow in it and transfer to the ice cubes. This can potentially lead to illnesses if contaminated ice cubes are consumed.
Conclusion:
Regularly cleaning your Frigidaire ice maker EFIC235 is essential to ensure its longevity and optimal performance. With this step-by-step guide, you can clean your ice maker thoroughly and safely, providing you with clean and fresh-tasting ice cubes for your beverages.